Wednesday, March 21st, 2012

Extending SmartHire (Template Based Hire) with custom Field Change & Field Prompt Events

 

‘Hiring new employees or adding contingent workers into the system is one of the most time-consuming tasks for Human Resources departments. Template-Based Hire reduces the current labor-intensive data entry process through the Personal Data and Job Data pages by providing a configurable, template-driven approach. Template Administrators can define default data for various sections or fields in the hiring process and they can determine what sections should be displayed, hidden and made  equired to the end-user. This allows organizations to deploy policy control and flexibility in multiple template configurations for the end-users. This flexibility provides Human Resources departments the ability to decentralize the hiring process out to line managers or HR representatives in the field, rather than only allowing centralized hiring.’

Source: Red Paper Template Based Hire Red Paper for Human Resources 9.0.

With the SmartHire you can configure templates with common fields that are required for hiring an employee/contingent worker. On these templates you configure (predelivered) sections with fields, corresponding the PERSON, JOB etc record fields. These fields contain hardcoded validation, where available. Fortunately Oracle has also created a user exit, which you can use to build and configure your own business process validations and prompts. Unfortunately this not been documented. When you look at the screenshot below, you have two sections, where you can configure your own FieldChange event and Field Prompt event.

But what are the prerequisites for the Event class? Which methods need to be used? Which parameters need to be used? Does it need to have return values?

First thing you start to do, is start looking for documentation. There is a red paper available on Oracle Support  document 747744.1, Template Based Hire Red Paper for Human Resources 9.0. This states:

The Field Change App Class provides a user exit for field change code to be added. Some delivered section fields include field change code. For example, the Company field on the delivered Work Location – Job Fields section has field change code that builds prompt lists for other fields in the section, such as Location and Establishment ID. It is recommended that any validation methods added at implementation be stored in customer-created application classes.
The Field Prompt App Class section provides a field prompt user exit. Normally the prompt values come from a prompt table, but a program can be written instead to supply these values. We did not ship any field prompt code, but customers can add their own, if needed. We may actually deliver some field prompt code as system data in future as part of fixes for performance issues.

When you look at PeopleBooks for this subject, it states:

The Field Change App Class provides a user exit for field change code to be added. Some delivered section fields include field change code. For example, the Company field on the Work Location – Job Fields section has field change code that builds prompt lists for other fields in the section, such as Location and Establishment ID.

Note. Oracle recommends that any validation methods added to the PeopleSoft application at implementation be stored in a customer-created application class.

So I had to dig into the code, to see what was needed to build a custom Event class. After a couple of hours, I stumbled upon the Package HRTMPL. This package contains all classes to build the UI of SmartHire and set all FieldChange and Field Prompt Events. These (hardcoded) FieldChange and Field Prompt events get set by the class FieldChangeFactory and FieldPromptFactory.  Let’s take a closer look at the FieldChangeFactory class, here is a portion of the class.

import HRTMPL:TMPL:hrTmplEvent;
import HRTMPL:FC:*;

class FieldChangeFactory extends HRTMPL:TMPL:hrTmplEvent
   method FieldChangeFactory();
   method execute();
end-class;

method FieldChangeFactory
   %Super = create HRTMPL:TMPL:hrTmplEvent();
end-method;

method execute
   /+ Extends/implements HRTMPL:TMPL:hrTmplEvent.execute +/

   Local string &FieldName, &RecordName;
   Local object &lObjEvent;
   Local HRTMPL:FC:FieldChange &objFieldChange;

   If %This.getSectionField().isFieldEvent() Then
      &lObjEvent = CreateObject(%This.getSectionField()
      .getEventClassPath() | ":" | %This.getSectionField()
      .getEventClassID());
      ObjectDoMethod(&lObjEvent, "setTmplRowSet", %This.getTmplRowSet());
      ObjectDoMethod(&lObjEvent, "setSectionField", %This.getSectionField());
      ObjectDoMethod(&lObjEvent, %This.getSectionField().getEventMethod());

   Else

      &FieldName = %This.getSectionField().getName();
      &RecordName = %This.getSectionField().getParentRecord().getName();

      Evaluate &RecordName
      When Record.JOB

         Evaluate &FieldName
         When Field.BUSINESS_UNIT
            &objFieldChange = create HRTMPL:FC:JobBusinessUnit();
            Break;
         When Field.REG_REGION
            &objFieldChange = create HRTMPL:FC:JobRegRegion();
            Break;
         Evaluate [OTHERFIELDS, ETC, ETC]
         When-Other
         End-Evaluate;
         Break;

      When-Other;
      End-Evaluate;

      If All(&objFieldChange) Then
         &objFieldChange.setTmplRowSet(%This.getTmplRowSet());
         &objFieldChange.setSectionField(%This.getSectionField());
         &objFieldChange.execute();
      End-If;
   End-If;
end-method;

When you look at this code, you’ll see that if a custom FieldChange is set on a field, the code runs the following lines

1 &lObjEvent = CreateObject(%This.getSectionField().getEventClassPath() |
  ":" | %This.getSectionField().getEventClassID());
2 ObjectDoMethod(&lObjEvent, "setTmplRowSet", %This.getTmplRowSet());
3 ObjectDoMethod(&lObjEvent, "setSectionField", %This.getSectionField());
4 ObjectDoMethod(&lObjEvent, %This.getSectionField().getEventMethod());

On the first line the Object is created that you defined in the FieldChange section of the field configuration. After this, the method setTmplRowSet is executed and after this the method setSectionField is executed. After this your custom method is called,  you defined in the FieldChange section of the field configuration. You might think you need a custom class with three methods.

When you look at the predelivered  FieldChange classes, you can create the following class hierarchy diagram.

You can see the predelivered  FieldChange classes (PersonBirthCountry, PersonNIDCountry, etc) get extended from FieldChange class, which in it’s turn get extended from the hrTmplEvent class. The hrTmplEvent class already contains the setTmplRowSet  and setSectionField methods.

So, if you were to create your custom class, you should extend the HRTMPL:FC:FieldChange class. You would have to create only one custom method, since the other two methods are inherited from the superclass.

Now that we know what the class needs to look like and where it should reside, let’s create a custom package and class for the field Position Number. Whenever you change the Position Number, I would like to default the Salary Admin Plan, Grade and Step from the PositionData table. The following example will execute this.

 

import HRTMPL:FC:FieldChange;
class hrTbhFieldChangePosition extends HRTMPL:FC:FieldChange
   method hrTbhFieldChangePosition();
   method execute();
end-class;
/* Constructor */
method hrTbhFieldChangePosition
   %Super = create HRTMPL:FC:FieldChange();
end-method;

method execute
   /+ Extends/implements HRTMPL:FC:FieldChange.execute +/
   Local string &PosNbr;
   Local Record &rPositionData;
   Local string &SalAdminPlan, &Grade, &Step;

   /* Get selected position number */
   &PosNbr = %This.getTmplRowSet().getField(Record.JOB, 1, Field.POSITION_NBR)
   .getValue();

   /* Check if position has a value, onload this in empty */
   If All(&PosNbr) Then

      /* Get Position defaults from POSITION_DATA record */
      &rPositionData = CreateRecord(Record.POSITION_DATA);
      &rPositionData.POSITION_NBR.Value = &PosNbr;
      &rPositionData.SelectByKeyEffDt(%Date);

      /* Get default values from Position Data */
      &SalAdminPlan = &rPositionData.SAL_ADMIN_PLAN.Value;
      &Grade = &rPositionData.GRADE.Value;
      &Step = &rPositionData.STEP.Value;

      MessageBox(0, "", 0, 0, "Choosen position: " | &PosNbr |
      "; Set SalAdminPlan/Grade/Step to: " | String(&SalAdminPlan) |
      " / " | String(&Grade) | " / " | String(&Step));

      /* Set Field Values from Position Data */
      %This.getTmplRowSet().getField(Record.JOB, 1, Field.SAL_ADMIN_PLAN)
      .setValue(&SalAdimPlan);
      %This.getTmplRowSet().getField(Record.JOB, 1, Field.GRADE)
      .setValue(&Grade);
      %This.getTmplRowSet().getField(Record.JOB, 1, Field.STEP)
      .setValue(&Step);
   End-If;
end-method;

The same way the Field Prompt event is constructed.

When you look at the FieldPromptFactory class, you will see the following lines:

If %This.getField().isPromptEvent() Then
   &lObjEvent = CreateObject(%This.getField().getPromptClassPath() |
   ":" | %This.getField().getPromptClassID());
   ObjectDoMethod(&lObjEvent, "setTmplRowSet", %This.getTmplRowSet());
   ObjectDoMethod(&lObjEvent, "setField", %This.getField());
   ObjectDoMethod(&lObjEvent, %This.getField().getPromptMethod());

This class creates your custom FieldPrompt class, executes method setTmplRowSet and setField and then executes your custom method.

The following class diagram illustrates the hierarchy.

So, if you were to create your custom class, you should extend the HRTMPL:FP:FieldPrompt class. You would have to create only one custom method, since the other two methods (setField, setTmplRowSet) are inherited from the superclass. Let’s say we want the Position Number to have only three positions eg 19000017, 19000018, 19000019. The custom class would look like this:

import HRTMPL:FP:FieldPrompt;
import HRTMPL:TMPL:hrTmplField;
import HRTMPL:TMPL:hrTmplCodeList;
import HRTMPL:TMPL:hrTmplCode;
class hrTbhPromptPosition extends HRTMPL:FP:FieldPrompt
   method hrTbhPromptPosition();
   method execute();

   property HRTMPL:TMPL:hrTmplField objTmplField;
end-class;
/* Contructor */
method hrTbhPromptPosition
   %Super = create HRTMPL:FP:FieldPrompt();
end-method;

method execute
   /+ Extends/implements HRTMPL:FP:FieldPrompt.execute +/
   Local integer &i;
   Local HRTMPL:TMPL:hrTmplCodeList &lobjCodeList;
   Local HRTMPL:TMPL:hrTmplCode &lobjCode;
   Local Rowset &rsPositionData;
   Local string &PositionNbr, &PositionDescr;

   /* Get current field executing this method */
   &objTmplField = %This.getField();

   /* Create custom rowset for dropdown values */
   &rsPositionData = CreateRowset(Record.POSITION_DATA);
   &rsPositionData.Fill("WHERE POSITION_NBR IN
   ('19000017','19000018','19000019')");

   /* Create runtime list of values object */
   &lobjCodeList = create HRTMPL:TMPL:hrTmplCodeList();

   /* Loop through custom rowset positions */
   For &i = 1 To &rsPositionData.ActiveRowCount
      /* Get Position Number & Description */
      &PositionNbr = &rsPositionData(&i).GetRecord(1)
      .POSITION_NBR.Value;
      &PositionDescr = &rsPositionData(&i).GetRecord(1)
      .DESCR.Value;

      /* Create runtime value object */
      &lobjCode = create HRTMPL:TMPL:hrTmplCode(&PositionNbr,
      &PositionDescr);

      /* Add runtime value object to list of values object */
      &lobjCodeList.addCode(&lobjCode);

   End-For;

   /* Set runtime list of values object to current Field */
   &objTmplField.setCodeList(&lobjCodeList);

end-method;

I have created these two classes in a custom package CUSTOM_HRTMPL.

These classes are configured on the Position Number field, as seen in the second screenshot of this post.

Now let’s see it in action on a PeopleSoft Vanilla Demo environment using Template KUEMP_MGR_POSITION, with custom events on section WORK_LOC_POS_NBR on field Position Number.

FieldPrompt with only the position numbers 19000017, 19000018, 19000019

Finally the FieldChange event when selecting a position number.

 

 Viewed 2175 times by 794 visitors


Category: General / HR / Technical
You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

6 Responses (last comment shown first)

August 21, 2012
Julien
avatar

Hi,

Finally, I found why the FieldChange was not working : there seems to be a bug in the FieldChangeFactory class (in HRTMPL:FC package). The problem is that the method name is not returned properly. Maybe it’s my version of Peoplesoft / Peopletools that is not up to date. So, I created a temporary solution in the development environment, and I will try to open a SR to Oracle as soon as possible. Here is my solution :

[...]
If %This.getSectionField().isFieldEvent() Then
&lObjEvent = CreateObject(%This.getSectionField().getEventClassPath() | “:” | %This.getSectionField().getEventClassID());
ObjectDoMethod(&lObjEvent, “setTmplRowSet”, %This.getTmplRowSet());
ObjectDoMethod(&lObjEvent, “setSectionField”, %This.getSectionField());
/*Julien Baillet Start*/
If %This.getSectionField().getEventMethod() “” Then
/*Julien Baillet End*/
ObjectDoMethod(&lObjEvent, %This.getSectionField().getEventMethod());
/*Julien Baillet Start*/
Else
ObjectDoMethod(&lObjEvent, “execute”);
End-If;
/*Julien Baillet End*/
[...]

Since I named all my methods “execute”, I force this name if the methodname is not found (which means always in my case).

Julien

[Reply to this comment]


July 27, 2012
avatar

I agree with John, it is a bit hard to understand the problem.

On my project, I tried to add custom records and fields, to set the emergency contacts, but I had a lot of problem, for the simple reason that the emergency contacts are not part of the vanilla components for job or personal data.

After investigation, I founded in the code that the themplate-based hire simply call Job and Personal Data Component Interfaces to save data. If you added a custom field, you need to add it to those components and rebuild the component interfaces.

For our needs, I don’t think we will customize the components and re-create the CIs, we will simply try to put a link somewhere to redirect to the user (manager in our case) to a page to set the emergency contact, or popup this page into a new window. I know that one BA on my project openned a SR and that Oracle said that emergency contacts might certainly be added to template-based hire in the future, in a new maintenance pack or a new version.

Julien

[Reply to this comment]


July 27, 2012
avatar

Hello Marco,

Could you post your code as well? It is quite hard to see what’s going wrong based on only the error saying it cannot build the page.

[Reply to this comment]


July 25, 2012
Marco
avatar

Great article.

i’m used your method above. I’m adding a custom record(H_job) that contains (H_jobcode). I create a custom application package and class – I cloned the fieldchange and fieldprompt for JOBLocation and used them in my custom app-package . I also updated the worklocation sections as you mentioned in the frist screen print of this article and am getting an error when i try an dpull up the TBH page

Error occurred while building the page. (1007,32) HRTMPL.TMPL.hrTmplObject.OnExecute Name:paint PCPC:3412 Statement:56
Called from:HRTMPL.TBH.hrTbhObject.OnExecute Name:paint Statement:250
Called from:HRTMPL.TMPL.hrTmplObject.OnExecute Name:Transfer Statement:166
Called from:HRTMPL.TMPL.hrTmplObject.OnExecute Name:next Statement:70
Called from:HRTMPL.TBH.hrTbhObject.OnExecute Name:next Statement:31
Called from:HR_TBH_JOB.GBL.HR_TBH_WRK.TBH_NEXT.FieldChange Statement:2

Error occurred while building the page.

is there something else i need to do? please let me know Marco

[Reply to this comment]


July 9, 2012
avatar

It’s me again.

I adapted your Field Prompt user exit and it seems that we can default the prompt values only if the field prompt Display Type is set as a drop down. I first tried with a prompt table, and the values were not shown when searching for a value, even if the code was working properly (I put a lot of messagebox to follow it)

Julien

[Reply to this comment]


July 9, 2012
avatar

Very good article.

I am starting to build a template and to configure it. I will have to use the Field Prompt user exit to limit the choice for some prompt values.

For the moment, I have been using the Validation user exit, which is directly on the template section. It is working the same way as the Field Change and Field Prompt. For my first use, I had to validate that the phone number was made of 10 digits.

I also used the Validation user exit as a work around to default some values dynamically. In fact, my template is made of two pages, and on the validation of one section on the first page, I added some code to set the value of some fields on the second page. I don’t know if there is a better way to do that without modifying vanilla code.

Thanks again for your article,

Julien

[Reply to this comment]